State of the Art Facility
Progressive Molding was designed and built from the ground up to be a modern injection molding facility. Our employees, equipment and management were specifically selected to be part of our “Application Specific Team” with “Efficiency” as our main goal. Two years of effort resulted in one of the most cost-effective injection molding facilities in Southern California.
We have the resources, experience and the equipment to safely run your products in the smallest machine, with the fastest cycle time, and using the specified material in order to give you the best overall price.
| AUXILIARY EQUIPMENT |
| PARTS CONVEYORS |
3 |
| PLASTIC GRANULATORS - 5 to 7.5 H.P. |
3 |
| CHEVROLET E3500 (15') BOXED TRUCK |
1 |
| FORKLIFT - 3,000 lb. CAPACITY |
2 |
| ULTRASONIC WELDER, BRANSON-8400 |
1 |
|
|
INJECTION MOLDING
PRESSES |
|
Tonnage |
Shot
(oz) |
Platten
Size |
Tie
Bar Width |
Boy* |
24.2 |
2.17 |
16
x 16 |
10.16 |
Boy* |
15 |
1.2 |
10
x 9.375 |
10 |
Boy* |
22 |
1.2 |
10
x 9.375 |
10 |
Boy* |
38.58 |
2.6 |
19.69
x 19.69 |
11
x 10 |
Boy* |
38.58 |
2.6 |
19.69
x 19.69 |
11
x 10 |
Promax**
|
80 |
4.8 |
19.29
x 17.72 |
12.99
x 11.42 |
Promax** |
110 |
8.0 |
22.65
x 20.08 |
14.76
x 12.80 |
Fortune** |
130 |
8.9 |
24.80
x 24.80 |
18.11
x 18.11 |
Fortune** |
110 |
6.1 |
22.65
x 20.08 |
16.14
x 16.14 |
Fortune** |
88 |
5.4 |
21.25
x 20 |
14.17
x 14.17 |
| Fortune** |
242 |
17.3 |
28.375
x 28.375 |
20.08
x 20.08 |
*Multistage injection, hydraulic core pull and hydraulic ejection.
**Microprocessor control, SPC capabilities, multistage injection, hydraulic core pull and hydraulic ejection.
| PROCESS CONTROL EQUIPMENT |
| DESICCANT TYPE DRYERS - 15 to 200 lbs/hr. |
7 |
| HOPPER DRYERS W/VACUUM LOADER 70-300 lb. |
3 |
| MOLD TEMPERATURE CONTROLLER with microprocessor based controls |
7 |
| 30-TON CENTRAL CHILLING SYSTEM |
1 |
| 1-5 TON PORTABLE CHILLERS |
3 |
IMS 8 ZONE, HOT RUNNER CONTROLLER
With microprocessor based controls |
1 |
| DME 8 ZONE, HOT RUNNER CONTROLLER |
3 |
|
